Search…
Introduction
Tips and Tricks for Building
Building Materials
Structure
Brackets
Corrugated Plastic Sheets
Actuators
Motors
HD Hex Motor
Core Hex Motor
Servos
Choosing an Actuator
Transmitting and Transforming Motion
Introduction to Motion
Sprockets and Chain
Gears
Timing Belts and Pulleys
Polyurethane Round Belt and Pulleys
Wheels
Linear Motion
Hardware and Tools
M3 Hardware
T-Slot Screws
Chain Tool
Building Techniques
Supporting Motion
Constraining Motion
Compatibility
Build Guides
Linear Motion Kit
Channel Drivetrain
Channel Drivetrain - Mecanum Upgrade
Mecanum Drivetrain Kit
Extrusion Chain Drivetrain
Extrusion Gear Drivetrain
Class Bot V2
Class Bot
Electronics and Communication
REV Control System
Sensors
Powered By GitBook
Core Hex Motor

Core Hex Motor Basics

The Core Hex Motor (REV-41-1300) is a motor that features a 90 degree orientation and a female output shaft for maximum flexibility and ease of use. Insert any of the REV standard 5mm Hex Shafts into or through the Core Hex Motor to create custom length motor output shafts. The Core Hex Motor has a built in magnetic quadrature encoder which is compatible with 5V or 3.3V logic level devices including the Control Hub (REV-31-1595) and Expansion Hub (REV-31-1153).

Pinout

The Core Hex Motor uses a 2-pin JST-VH Connector for motor power and a 4-pin JST-PH for sensor feedback from the built-in encoder. For more information on using the cables and connectors included with the Core Hex Motor, see the REV Control System - Cable and Connectors documentation. The image below has the pinout for the motor power and the encoder.

Product Specs

  • Output Shaft: 5mm Female Hex
  • Weight: 7 oz
  • Free Speed: 125 RPM
  • Stall Torque: 3.2 N-m
  • Stall Current: 4.4 A
  • Gear Ratio: 72:1
  • Encoder Counts per Revolution
    • At the motor - 4 counts/revolution
    • At the output - 288 counts/revolution

When to Use?

The general recommendation is to use the Core Hex motor for lighter duty arms and intakes.
Visit the Choosing and Actuator page to learn more about how the determine what type of actuator is correct for your mechanism.

How to Use?

To learn more about the built in encoders and wiring for the core hex motor visit the Control System Guide.

How to Mount the Core Hex Motor

The Core Hex Motor has two faces for mounting on two sides of the motor. The combination of the Motion Pattern is clocked to different angles on each face giving twelve different motor angles. The images below exhibit a basic mounting structure for two of the twelve positions that are available.
The images show a very basic mounting system. It is always advised to properly support elements of your robot with more 2 or more plastic brackets
​
Previous
HD Hex Motor
Next - Actuators
Servos
Last modified 1yr ago
Export as PDF
Copy link
Contents
Core Hex Motor Basics
Pinout
Product Specs
When to Use?
How to Use?
How to Mount the Core Hex Motor