Single Sprocket Shaft Assembly

Single Sprocket Shaft Assembly Parts Required

PART NUMBER

DESCRIPTION

QTY.

REV-41-1323

15MM SPACER

1

REV-41-1324

3MM SPACER

2

REV-41-1326

THROUGH BORE BEARING - SHORT

2

REV-41-1327

SHAFT COLLAR

1

REV-41-1338

10 TOOTH #25 SPROCKET

1

REV-41-1348

5MM X 90MM HEX SHAFT

1

Single Sprocket Shaft Assembly Steps

Add a Shaft Collar flush to the end of the 5mm x 90mm Hex Shaft.

Tighten the Shaft Collar.

Slide a Through Bore Bearing – Short onto the shaft.

Note the smaller portion of the bearing faces towards the Shaft Collar.

Slide a 3mm Spacer onto the shaft.

Slide a 10 Tooth # 25 Sprocket onto the shaft.

Slide a 15mm Spacer onto the shaft.

Slide a 3mm Spacer onto the shaft.

Slide a Through Bore Bearing – Short onto the shaft.

Note the smaller portion of the bearing faces away from the Shaft Collar.

SINGLE SPROCKET ASSEMBLY COMPLETE

Repeat the above steps until there are two completed Single Sprocket Assemblies. Set aside for later.