Gear Idler Assembly

Gear Idler Assembly Parts Required

PART NUMBER

DESCRIPTION

QTY.

REV-41-1322

END CAP BEARING

2

REV-41-1323

15MM SPACER

1

REV-41-1327

SHAFT COLLAR

1

REV-41-1336

72 TOOTH PLASTIC GEAR

1

REV-41-1347

5MM X 75MM HEX SHAFT

1

Gear Idler Assembly Steps

Add an End Cap Bearing to the 75mm x 5mm Hex Shaft.

Slide a Shaft Collar onto the shaft. Tighten the set screw.

Note: the Shaft Collar should be flush with the bearing.

Slide a 15mm Spacer onto the shaft.

Slide an 72 Tooth Plastic Gear onto the shaft

Add an End Cap Bearing to the shaft.

Note: the smaller portion of the bearing faces away from the gear

GEAR IDLER ASSEMBLY COMPLETE.

Repeat the above steps until there are four completed Gear Idler Assemblies. Set aside for later.