Middle Grip Wheel Assembly

Middle Grip Wheel Assembly Parts Required

PART NUMBER

DESCRIPTION

QTY.

REV-41-1267

90MM GRIP WHEEL

1

REV-41-1322

END CAP BEARING

1

REV-41-1323

15MM SPACER

1

REV-41-1324

3MM SPACER

2

REV-41-1327

SHAFT COLLAR

1

REV-41-1329

THROUGH BORE BEARING - LONG

1

REV-41-1337

90 TOOTH PLASTIC GEAR

1

REV-41-1349

5MM X 135 MM HEX SHAFT

1

Middle Grip Wheel Assembly Steps

Add an End Cap Bearing to the 135 mm x 5mm Hex Shaft.

Slide a 3mm Spacer onto the shaft.

Slide a 90mm Grip Wheel onto the shaft.

Slide a 90 Tooth Plastic Gear onto the shaft.

Slide a 15mm Spacer onto the shaft.

Slide a 3mm Spacer onto the shaft.

Slide a Shaft Collar onto the shaft. Make sure the shaft collar is flush with the 3mm Spacer. Tighten the set screw.

Slide a Through Bore Bearing - Long onto the Shaft.

Note: the longer portion of the bearing faces away from the Shaft Collar.

MIDDLE GRIP WHEEL ASSEMBLY COMPLETE

Repeat the above steps until there are two completed Middle Grip Wheel Assemblies. Set aside for later.