PART NUMBER
DESCRIPTION
QTY.
5MM X 90MM HEX SHAFT
1
1.5MM SPACER
1
3MM SPACER
3
15MM SPACER
1
THROUGH BORE BEARING - SHORT
2
SHAFT COLLAR
1
20 TOOTH #25 SPROCKET
1
90MM TRACTION WHEEL
1
Slide a Through Bore Bearing – Short onto the shaft.
Slide a 3mm Spacer onto the shaft.
Slide a 1.5mm Spacer onto the shaft.
Slide a 15mm Space onto the shaft.
Slide a 20 Tooth #25 Sprocket onto the shaft.
Slide a 3mm Spacer onto the shaft.
Slide a 90mm Traction Wheel onto the shaft.
Slide a Shaft Collar onto the shaft.
Slide a Through Bore Bearing – Short onto the shaft.
Traction Wheel Assembly Complete.
Repeat the steps above until you have two compete Traction Wheel Assemblies. Set aside for later.
