PART NUMBER
DESCRIPTION
QTY.
15MM BEARING PILLOW BLOCK
10
15MM PLASTIC INSIDE CORNER BRACKET
10
15MM PLASTIC 45 DEGREE BRACKET
2
15MM METAL BENT HD HEX MOTOR BRACKET V2
2
15MM METAL BENT CORE HEX MOTOR BRACKET V2
1
15MM METAL BENT SERVO BRACKET V2
1
M3 X 8MM HEX CAP SCREWS
80
M3 NYLOC NUTS
80
Only two of the four 45 Degree Brackets in the build will be pre-loaded.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have ten Pre-Loaded Brackets.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have ten Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
