75mm Single Sprocket Shaft Assembly

PART NUMBER

DESCRIPTION

QTY.

REV-41-1323

15MM SPACER

1

REV-41-1324

3MM SPACER

2

REV-41-1326

THROUGH BORE BEARING - SHORT

2

REV-41-1327

SHAFT COLLAR

1

REV-41-1338

10 TOOTH #25 SPROCKET*

1

REV-41-1347

5MM X 75MM HEX SHAFT

1

Add a Shaft Collar flush to the end of the 5mm x 75mm Hex Shaft.

Tighten the Shaft Collar.

Slide a Through Bore Bearing – Short onto the shaft.

Note: the smaller portion of the bearing faces towards the Shaft Collar.

Slide a 3mm Spacer onto the shaft.

Slide a 15mm Spacer onto the shaft.

Slide a 10 Tooth # 25 Sprocket onto the shaft.

Note: For the Mecanum Drivetrain Kit, replace the sprocket with a 24 Tooth Pulley

Slide a 3mm Spacer onto the shaft.

Slide a Through Bore Bearing – Short onto the shaft.

Note: the smaller portion of the bearing faces away from the Shaft Collar.

SINGLE SPROCKET ASSEMBLY COMPLETE

Repeat the above steps until there are two completed Single Sprocket Assemblies. Set aside for later.