PART NUMBER
DESCRIPTION
QTY.
15MM BEARING PILLOW BLOCK
16
15MM PLASTIC LAP CORNER BRACKET
16
15MM PLASTIC INSIDE CORNER BRACKET
8
15MM PLASTIC INDEXABLE MOTION BRACKET
4
ULTRAPLANETARY BENT MOUNTING BRACKET
2
ULTRAPLANETARY FLAT MOUNTING BRACKET
2
M3 X 8MM HEX CAP SCREWS
128
M3 NYLOC NUTS
128
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have sixteen Pre-Loaded Brackets.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have eight Pre-Loaded Brackets.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have sixteen Pre-Loaded Brackets.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have four Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
