All pages
Powered by GitBook
1 of 1

Loading...

Building Starter Bot

The 2026 REV DUO FGC Starter Bot features a modified REV DUO channel drivetrain designed around the needs of this year’s challenge. At the front, a wide intake collects multiple Wildfire game pieces and feeds them into a hopper that can hold 8 to 12 Wildfire. From there, a feeder system delivers game pieces into a dual-motor launcher for repeated scoring. Near the end of the match, the climbing system is designed to position the robot at the top of the brace. Overall, the design gives teams a functional starting point while leaving plenty of room to test, tune, and improve mechanisms for their own strategy.

Resources

2026 FGC Starter Bot Build Guide - PDF

A4 (210 x 297 mm) Corrugated Plastic Template

Letter (8.5 x 11 in) Corrugated Plastic Template

A PDF viewer is required to view and print the templates.

  • US and Canada printers (Letter - 8.5 in x 11 in)

  • International (A4 - 210mm x 297mm)

Here are examples of the correct print settings in Windows (left) and macOS (right):

1
2
3
4

Tape the guides onto the corrugated plastic, then cut around the guide.

5

Score along the solid lines highlighted below. Be sure only to cut the top layer of the plastic; DO NOT cut all the way through the plastic.

6

Gently bend along the scored line.

7

Remove the cutting guides.

Tips and Tricks

Printing Corrugated Plastic Templates

Important: The templates must be printed at the correct scale to fit the robot properly.

Template Assembly and Corrugated Plastic Cutting

Cut the guides from the template.

Fold along the dotted line on the #1 template section.

Line up the folded dotted line of the #1 section with the dotted line on the #2 section, and tape the seam.

file-cad FGC Starter Bot CAD - Onshape
Starter Bot Tips and Tricks
PDF files are provided above in two sizes: