> For the complete documentation index, see [llms.txt](https://docs.revrobotics.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.revrobotics.com/frc-kickoff-concepts/2026/cut-list.md).

# Cut List

{% hint style="info" %}
Cut Lengths for the EasySwerve and MAXSwerve configurations are the same unless specifically noted!
{% endhint %}

### 1/2in Rounded Hex Shaft (REV-21-1135)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism |
| -------------- | --- | --------- |
| 13             | 1   | Conveyor  |
| 12 3/4         | 2   | Conveyor  |
| 11             | 2   | Conveyor  |
| 1 1/4          | 4   | Intake    |
| 17 7/8         | 3   | Intake    |
| 18 7/16        | 1   | Intake    |
| 14 1/4         | 1   | Launcher  |
| 12 3/4         | 1   | Launcher  |
| 13 7/8         | 1   | Launcher  |
| 4 15/16        | 2   | Launcher  |
| {% endtab %}   |     |           |

{% tab title="Suggested Layout" %}

<figure><img src="/files/5pUOqisaQdDzv9v1Ceub" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXSpline Shaft (REV-21-2520)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism |
| -------------- | --- | --------- |
| 10-11/16       | 2   | Conveyor  |
| 10-11/16       | 3   | Launcher  |
| {% endtab %}   |     |           |

{% tab title="Suggested Layout" %}

<figure><img src="/files/k1Dto1c3QS165Md71VMd" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### Aluminum Angle - 0.74in x 0.74in (REV-21-3207)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 10             | 1   | Launcher   |
| 11             | 3   | Launcher   |
| 17-1/2         | 2   | Launcher   |
| 8              | 2   | Launcher   |
| 25             | 1   | Launcher   |
| 4              | 1   | Right Wall |
| {% endtab %}   |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/FynrdffXb53VdAh2KDoT" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### 1/2in x 1/2in MAXTube (REV-21-3289)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 25             | 2   | Drivetrain |
| 7-1/2          | 2   | Intake     |
| 12-1/2         | 2   | Launcher   |
| {% endtab %}   |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/NEmf5ckiv9EIO12kfS92" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### Polycarbonate Sheet - 1/2in Grid Pattern (REV-21-3410)

{% tabs %}
{% tab title="Cut List" %}

| Length x Width (inches | QTY | Mechanism  |
| ---------------------- | --- | ---------- |
| 12 x 5                 | 2   | Conveyor   |
| 26-1/2 x 10-1/2        | 1   | Drivetrain |
| 17 x 8                 | 1   | Intake     |
| 24 x 7-1/2             | 2   | Launcher   |
| 24-1/2 x 12-1/2        | 1   | Launcher   |
| 13 x 11                | 2   | Launcher   |
| 23 x 17-1/2            | 1   | Left Wall  |
| 23 x 17-1/2            | 1   | Right Wall |
| {% endtab %}           |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/tijVIAjzmKgwFZwbjLZR" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXTube - 1x1 - 1/16in Wall - Grid Pattern (REV-21-3540)

{% hint style="warning" %}
Note: the EasySwerve and MAXSwerve configurations require different lengths and quantities of each length.
{% endhint %}

{% tabs %}
{% tab title="EasySwerve Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 16-1/2         | 2   | Intake     |
| 2              | 4   | Intake     |
| 18             | 2   | Intake     |
| 25             | 1   | Launcher   |
| 6              | 2   | Launcher   |
| 24             | 2   | Launcher   |
| 23             | 1   | Left Wall  |
| 16             | 1   | Left Wall  |
| 23             | 1   | Right Wall |
| 16             | 1   | Right Wall |
| {% endtab %}   |     |            |

{% tab title="MAXSwerve Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 16             | 2   | Intake     |
| 2              | 6   | Intake     |
| 17-1/2         | 2   | Intake     |
| 25             | 1   | Launcher   |
| 6              | 2   | Launcher   |
| 24             | 2   | Launcher   |
| 23             | 1   | Left Wall  |
| 16             | 1   | Left Wall  |
| 23             | 1   | Right Wall |
| 16             | 1   | Right Wall |
| {% endtab %}   |     |            |

{% tab title="Suggested Layouts" %}

#### Suggested Layout for EasySwerve&#x20;

<figure><img src="/files/8RjAzfoKjZusD69Cv3nC" alt=""><figcaption></figcaption></figure>

#### Suggested Layout for MAXSwerve

<figure><img src="/files/FQGEjPue34WYFIsc4b0M" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXTube - 1x1 - 1/8in Wall - Grid Pattern (REV-21-3543)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism |
| -------------- | --- | --------- |
| 6              | 2   | Conveyor  |
| 6-1/2          | 2   | Conveyor  |
| {% endtab %}   |     |           |

{% tab title="Suggested Layout" %}

<figure><img src="/files/kojtf7iztXbiBEBuven0" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXTube - 2x1 - 1/16in Wall - Grid Pattern (REV-21-3552)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 27             | 1   | Left Wall  |
| 27             | 1   | Right Wall |
| {% endtab %}   |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/Q1xHst5cUymj7ddSgdN6" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXTube - 2x1 - 1/8in Wall - Grid Pattern (REV-21-3555)

{% tabs %}
{% tab title="EasySwerve Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 19             | 4   | Drivetrain |
| {% endtab %}   |     |            |

{% tab title="MAXSwerve Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 20             | 4   | Drivetrain |
| {% endtab %}   |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/ZDGsJfoWbgRbCRYxe2w0" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}

### MAXTube - 2x1 - 1/8in Wall - MAX Pattern (REV-21-3580)

{% tabs %}
{% tab title="Cut List" %}

| Length (inches | QTY | Mechanism  |
| -------------- | --- | ---------- |
| 13             | 2   | Intake     |
| 25             | 2   | Conveyor   |
| 24-1/2         | 2   | Launcher   |
| 17             | 1   | Left Wall  |
| 17             | 1   | Right Wall |
| {% endtab %}   |     |            |

{% tab title="Suggested Layout" %}

<figure><img src="/files/1he1u2LFvNZW9J080n72" alt=""><figcaption></figcaption></figure>
{% endtab %}
{% endtabs %}