The materials listed below will attach the SPARK MAX Mounting Bracket for ONE MAXSwerve Module
MAXSwerve SPARK MAX Mounting Bracket (REV-21-2998)
1
1
1 piece for attaching the MAXSwerve Bracket, More will be needed for assembling a whole MAXSwerve Drivetrain
2
2
The MAXSwerve SPARK MAX Mounting Bracket is reversible and can be used on any corner of your MAXSwerve Drivetrain
1) Insert your 2x1 MAXTube into the mounting slot on the MAXSwerve Module
2) Slide the MAXSwerve SPARK MAX Mounting Bracket over the tabs of the MAXSwerve module that you just inserted the MAXTube into
3) Secure the MAXSwerve SPARK MAX Mounting Bracket and 2x1 MAXTube to the MAXSwerve Module with 2 - 3in #10-32 Button Head Screws and Nylock Nuts
The SPARK MAX Mounting Bracket has an optional fourth hole that teams can use to secure the Mounting Bracket directly to their MAXSwerve module!
Teams can use #10-32 3/8in Button-Head Socket Cap Screws to attach this Mounting Bracket to the module, as pictured below. We recommend using threadlocker on this screw.
