MAXSwerve Tips and Tricks
Applying Loctite to your MAXSwerve Module
Ensuring your screws are secure is crucial when assembling your MAXSwerve Modules. Neglecting proper Loctite applications may result in potential damage to your drivetrain. Here is a video with some best practices to keep in mind while applying Loctite or a similar thread locker to your screws.
Forgot to Apply Loctite to the UltraPlanetary Gearbox
If you forgot to apply Loctite during the assembly of the UltraPlanetary Subassembly, you can use a Wicking Grade Loctite to apply thread locker to the pre-assembled gearbox.
To use, apply the Wicking Loctite to the top of the UltraPlanetary Gearbox assembly where the screw tips are showing. The Loctite will wick between the engaged threads using capillary action to secure your screws.

Applying Grease to your MAXSwerve Module
We recommend applying grease to your MAXSwerve Modules during assembly and reapplying as needed to maintain your drivetrain. This lubrication helps the hardware that experiences high friction last longer and maintain performance.
When you apply grease, put on a pair of nitrile gloves. You can either squeeze the grease onto your gloved finger or directly onto the gear teeth. Work the grease in, making sure it's evenly distributed throughout the system. Wipe away any excess to avoid making a mess.
MAXSwerve Gears to Consider
Since the motor pinion is difficult to access after assembly, we recommend applying a full pinky finger's worth of grease to your choice of speed pinion. You can use a Q-Tip to cover the crests and roots of the gear.
Your Steering Gear directly interacts with the Steering Pinion, so it's a good idea to keep this component moderately greased. Simply put on some gloves and work the grease into the gear teeth; a little goes a long way.
Similar situation as before, the Wheel Bevel Gear directly interacts with the Bevel Pinion, so there's high friction going on. Squeeze a healthy bead trail along the teeth and work it in good.
The Drive Spur Gear interacts directly with the Speed Pinion; these are two parts you want a healthy coat of lubricant on.
When orienting the MAXSwerve Module in this position, you have access to the Wheel Bevel Gear, Steering Gear, and Drive Spur Gears. Perfect for a quick application with the WD-40 Specialist White Lithium Grease Spray.

Last updated
Was this helpful?