MAXSpline Brackets are compatible with the REV ION System and are designed to mount to pieces of 2x1in MAXTube - with MAX Pattern while maintaining proper pattern spacing.
In the REV ION Build System, motion brackets are referred to as MAXSpline Brackets because within the ION System, the MAXSpline shape is the core to transmitting motion. The major distinguishing feature of MAXSpline brackets are a MAXSpline bore, or a full MAX Pattern to support bearings and MAXHubs.
You can also use MAXSpline Brackets to mount motion components such as motors and pulleys, as seen below. A MAXPlanetary Gearbox fits perfectly on the 2in hole pattern of the Offset Mount MAXSpline Bracket (REV-21-2351).
Material: Aluminum 5052
Weights:
MAXSpline Bracket - Stacked: 35g (0.08lbs)
MAXSpline Bracket - Offset Mount: 91g (0.20lbs)
MAXSpline Bracket - Parallel Top Mount: 49g (0.11lbs)
MAX Pattern T Brackets are ideal for creating a perpendicular joint of MAX Pattern MAXTube, as seen in the example below:
Alternatively, the two MAXSpline openings allow for unique gearbox mountings, such as with the MAX 90 Degree Gearbox as shown here:
The Parallel Top Mount Bracket can be used to provide support to the end of a shaft that may be cantilevered otherwise:
The Offset Mount Bracket is perfect for allowing a motor to be mounted parallel to the axis of a MAXTube:
The extra row of holes on the Stacked Bracket can be used to tile the MAXSpline pattern on a MAXTube in 2D, keeping the holes and the spline on pitch with the mounting tube. The Stacked Bracket is recommended when the goal is to offset a motor from a tube while wanting to remain on pitch with the original tube spline openings.
