> For the complete documentation index, see [llms.txt](https://docs.revrobotics.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.revrobotics.com/ion-control/accessories/can-terminator-pack.md).

# CAN Terminator Pack

The CAN Terminator Pack provides two compact, plug-ready termination options. Each terminator uses a small 10mm x 10mm internal circuit board sealed with heatshrink and contains a dedicated 120-ohm terminating resistor, ensuring proper end-of-line signal integrity on any CAN network. The pack includes both a receptacle-side terminator and a pin-side terminator, making it easy to cleanly finish a CAN run no matter which connector style is present at the endpoint. 

<figure><img src="/files/eXdGSXdOZyVnVIQvLwy7" alt=""><figcaption></figcaption></figure>

#### Specifications&#x20;

| Parameter          | Value and Units   |
| ------------------ | ----------------- |
| Connector Type     | 3-Pin Dupont Pin  |
| Resistance         | 120 ohm           |
| Circuit Board Size | 10mm (1in) square |
| Total Length       | 74mm (2.91in)     |
| Wire Length        | 64mm (2.52in)     |
| Wire Gauge         | 22 AWG            |
| Weight (each)      | 1.5g (0.003lb)    |