All pages
Powered by GitBook
1 of 1

Loading...

POE Injector Cable

As of the 2026 FIRST Robotics Competition Season, the POE Injector Cable (REV-11-1210) is only legal with the OM5P radios.

The REV POE Injector Cable was specifically designed to address a common problem for many FRC teams with their wireless radios: intermittent power glitches.

The wireless radios used in the last several FRC seasons can be powered either through a traditional barrel jack or through a Power Over Ethernet (POE) port. Traditional barrel jacks can easily work themselves loose and often require hacks like hot glue to prevent intermittent power glitches. The REV POE Injector Cable eliminates the barrel jack by providing power directly to one of the POE ports on the radio. Two power wires branch off of the male end of the cable and can be connected to an appropriate power source like the Voltage Regulator Module (VRM). These power wires come crimped with ferrules that are compatible with the Weidmuller connectors on the VRM.

POE Injector Cable

Safety Note: Be sure to plug the male ethernet plug into the radio. Plugging this end into other devices that do not expect 12V POE, such as the roboRIO, can permanently damage them. Also, ensure that the power wires are connected with the proper polarity. Reverse polarity will permanently damage most radios.

Wiring Diagram

POE Injector Cable Wiring Diagram

Specifications

Wire Gauge

24 AWG

Ferrules Size

20 AWG

Ethernet Cable Length

30 cm

Power Cable Length

60 cm

Female Socket Mounting Threads

M3