Getting Started with the REV Hardware Client
We're Updating our Documentation! For the most up-to-date information about the Power Distribution Hub and other ION Control System Devices please check out the following new documentation pages:
The REV Hardware Client is software designed to make managing REV devices easier for the end user. This Client automatically detects connected device(s), downloads the latest software for those device(s), allows for seamless updating of the device(s), and allows for device configuration and management.
For more information on the REV Hardware Client, including a full list of supported devices, see the User's Manual.
| Latest REV Hardware Client - Version 1.5.3 |
|---|
You can also download the REV Hardware Client using an offline installer, bundled with software from March 21st, 2023: - Offline Installer bundled with FRC software
System Requirements
Operating System: Windows 10 (64-bit) or newer
Processor: 64-bit
Installation Instructions
Download the REV Hardware Client Installer above.
Run the Installer
Run the REV Hardware Client from the Windows Start Menu or a desktop shortcut
Updating your Power Distribution Hub
Startup the REV Hardware Client. Once the Power Distribution Hub is fully connected it will show up on the front page of the UI under the Hardware Tab. Select the Power Distribution Hub.
After selecting the Connected Hardware, the Update tab will pop up. Under Power Distribution Hub Firmware select Download.
Once the firmware has downloaded, select Update.
When the firmware update has completed a status message "Update Completed" will appear. The status for the Power Distribution Hub Firmware will also change to "Up-to-Date."
Last updated
