Radio Power Module Specifications

We're Updating our Documentation! For the most up-to-date information about the Radio Power Module and other ION Control System Devices please check out the following new documentation pages:

• REV ION Control System

  • Radio Power Module Resources

The following tables provide the operating and mechanical specifications for the Radio Power Module.

DO NOT exceed the maximum electrical specifications. Doing so will cause permanent damage to the Radio Power Module and will void the warranty.

DO NOT reverse the 12V power input polarity. Doing so will cause permanent damage to the REV Radio Power Module and will void the warranty.

Main Electrical Specifications

Parameter	Min	Typ	Max	Unit
Operating Voltage Range	4.7	12	18	V
Continuous Output Current	-	-	1	A
Power Input Wire Gauge (Bare Solid/Stranded)	24	-	16	AWG
Bare Wire Strip Length	0.33	0.35	0.37	in
Power Input Wire Gauge (Stranded, with ferrule)	24	-	18	AWG

Make sure to take into consideration current requirements when choosing wire gauge for any given application.

DO NOT connect the roboRIO into the WiFi Radio Ethernet port. Doing so can cause permanent damage to the roboRIO.

Mechanical Specifications

Parameter	Min	Typ	Max	Units
Body Length	-	3.375	-	in
Body Width	-	1.250	-	in
Body Height	-	0.875	-	in
Weight	-	0.09	-	lbs
Mounting Hole Grid Pitch	-	0.5	-	in
Mounting Screw Size (Clearance)	-	#10	-	-
Case Material	-	ABS	-	-

DO NOT use thread-locking fluid on the mounting hardware for the REV Radio Power Module. Thread-locking fluid will damage the ABS plastic case.

Mechanical Drawings

Radio Power Module mechanical drawings top & front view