Updating the Driver Hub

The Driver Hub has two parts of software that are field upgradable, the Driver Hub Operation System and the Driver Station Application. Both pieces of software are updatable either through the REV Hardware Client or directly on the Driver Hub with the Software Manager.

Driver Hub Software Manager

The Driver Hub has a Software Manager Application pre-installed for updating the Driver Hub. Open the application by pressing on the Software Manager icon. Select the Update All button to update all the software that requires updating.

Make sure the Driver Hub is connected to a WiFi network with access to the internet to download and install the latest software.

The updates can take several minutes to complete. Make sure the Driver Hub is charged or plug in the Driver Hub during the updating process.

REV Hardware Client

Startup the REV Hardware Client and connect the Driver Hub to the PC using the USB-A to USB-C cable. Once the Driver Hub is connected it will show up on the front page of the UI under the Hardware Tab. Select the Driver Hub.

After selecting the Connected Hardware the Update tab will pop up. Any software the needs updating will have an Out-of-Date notification. Pressing the update button allows the REV Hardware Client to download the software update and install on the Driver Hub.

Once all the Out-of-Date notifications are cleared the Driver Hub is fully up to date.