The REV Hardware Client 2 (RHC2) is software designed to make managing REV devices easier for the user. This Client automatically detects connected device(s), downloads the latest software for those device(s), and allows for seamless updating of the device(s)
Download the REV Hardware Client 2 Installer
Run the Installer
Run the REV Hardware Client 2 from the applications menu or a desktop shortcut
Automatically detect supported devices when connected via USB
One-click update of all software on connected devices
Pre-download software updates without a connected device
Back up and restore user data from supported devices
Auto-update to the latest version of the REV Hardware Client 2
Operating System Options:
Windows 11, Windows 10 (version 1709 - October 2017) or newer
macOS 15 (Sequoia) or newer
Linux: Ubuntu 24.04/Debian 12 or newer
REV Control Hub (REV-31-1595)
REV Driver Hub (REV-31-1596)
REV Expansion Hub (REV-31-1153)
Android Phones
REV SPARK MAX (REV-11-2158)
REV Devices must be running Firmware Versions 26.x.x or newer to be compatible with REV Hardware Client 2. Devices with 2025 firmware and below will need to be updated to 2026 firmware via before use.
Processor: 64-bit
RAM: 4GB
REV SPARK Flex (REV-11-2159)
REV Power Distribution Hub (REV-11-1850)
REV Pneumatic Hub (REV-11-1852)
REV Servo Hub (REV-11-1855)
REV MAXSpline Encoder (REV-11-9008)
A301 (REV-41-2714)
Generic CAN Devices

Adds parameter refresh mechanism when configuration is changed externally e.g. via a robot program or mode button press for SPARK, MAXSpline Encoder, and A301 (requires compatible firmware)
Fixes downloads and issue reports failing on Windows computers whose network filter or security software inspects HTTPS
Fixes Control Hub not being detected when its active robot configuration includes an Expansion Hub that isn't connected
Fixes the app being unable to connect to REV USB devices such as SPARK MAX on Linux unless the user was in the group
Fixes crash when opening a MAXSpline Encoder with 1.1.0 firmware
Adds offline firmware packs (FRC/FTC, latest or all public versions) to the download page, kept up to date with each firmware release, and an Import Pack button on the Downloads page to install them without internet
Adds support for installing the Robot Controller app on Android phones
Improves MAXSpline Encoder and CAN Encoder Adapter configuration
Removes conversion factors to match SPARK and encoder firmware
Fixes app crashing on startup on Intel Macs
Renames Expansion Hub Firmware to Expansion/Control Hub Firmware
Displays Robot Controller and Driver Station app versions in major.minor format
Adds a download location prompt for download actions from Control Hub's Robot Controller Console
Improves recovery of wireless Control Hub connections after a Wi-Fi drop
Adds a prompt on startup when an update is available, with the option to update now, on exit, or ignore it
Adds a prompt on startup showing the changelog after the app has been updated
Adds visualizer for absolute encoder utility
Adds inversion configuration to A301
Adds controller support for running motors
Adds auto-fetching latest releases on startup
Adds toast to show when an action failed due to being in read-only mode
Adds setpoint presets to A301/SPARK run pages
Fixes crash on run tab with A301 on versions before prerelease 16
Adds support for connecting to a remote RHC2 instance (like Systemcore) from a desktop client
Adds support for installing/updating a Systemcore's RHC2 from the desktop client
Adds ability for leader to release control and read only-clients to claim control
Adds a prompt for Windows users to install DFU drivers if none are found
Adds support for new A301 CAN specification introduced in firmware version 27.0.0-prerelease.15
Adds the ability to specify a speed for position control in A301's run utility
Adds a toggle on the Motioncore card to override the robot program to run motors without a driver station
Adds gearbox and motor health status cards for A301
Adds support for REV FTC devices (Control Hub, Expansion Hub, Driver Hub, Driver Station Phone)
Adds support for CAN Encoder Adapter
Adds search bar for signals on Telemetry page
Adds search bar for SPARK configuration tab
When connecting to a Control Hub via Wi-Fi, no other computer will be able to see the Control Hub until it is power-cycled. The same laptop can continue to see and use the Control Hub even if it reconnects or RHC2 is reopened.
Adds missing applied output signal for A301
Adds indicator to navigation bar to show whether you are in read-only mode
Improves startup time
Improves CPU and memory utilization during runtime
Adds support for A301
Adds support for Linux Arm64
Adds support for multiple separate CAN buses
Adds support for updating the bootloader of supported devices
Adds support for devices connected via Motioncore when running on Systemcore
Linux Arm64 does not currently support devices in DFU recovery mode
Adds support for configuring new MAXSpline Encoder parameters
Fixes start/stop button moving when running a SPARK
Fixes motors not stopping immediately when running multiple motors simultaneously
Fixes a bug causing devices to appear as remaining in bootloader mode after updating
Adds button to install DFU drivers on Windows
Adds warning when trying to run a motor without 12V
Adds ability to reset SPARK slider to zero by double-clicking on slider handle
Fixes splash screen not appearing in the foreground
Adds warning about SPARK devices with an unconfigured CAN ID
Adds button to clear telemetry signals
Adds dialog to move the application into the Applications folder on macOS for improved experience:
Fixes devices in recovery mode not appearing on macOS
Adds warning when trying to run a motor with the roboRIO present on the bus
Adds error toast for when a SPARK parameter value is rejected
Adds help dialog when loading devices takes a long time, especially for brand new SPARK MAXes on unsupported factory firmware
Adds privacy policy
Adds ability to start and stop multiple selected motors simultaneously
Fixes high CAN utilization when switching between many SPARK device tabs
Fixes an issue causing some SPARKs to continue spinning when disabling multiple at once
Fixes an issue causing SPARK devices to resume spinning after leaving the bus and returning
Fixes crash when opening on macOS
Fixes detection of devices on Linux
Fixes app icon
Initial stable release of REV Hardware Client 2
Fixes Android phones always being labeled as a Driver Station
Uses Control Hub's friendly name in device list
Improves general experience with the FTC Log Viewer
Updates the supported devices list on the About page to reflect all currently supported devices
Fixes UI crash on Systemcore
Fixes Robot Controller Console not working as expected for Control Hubs connected over USB
Fixes Expansion Hub firmware version not showing up for Control Hub devices
Fixes Control Hub menu labels being illegible in light mode
Fixes false positive error toast when attempting to run an A301
Fixes crash when adding closed-loop control telemetry for a SPARK
Fixes reset safe parameters showing the incorrect number of changes made
Fixes run multiple checkbox not working with A301
Fixes moving app to applications folder on macOS
Fixes selecting an A301 opening a SPARK with the same CAN ID on the same bus
Adds tooltip and animation for identify button
Improves robustness of leader/reader mechanism when clients disconnect
Updates robot program override to only be controlled by the leader
Fixes Systemcore serving a stale, cached UI after an update. You will need to empty cache and refresh the UI for this to take effect.
Fixes frontend crash when downloads database file gets corrupted, particularly on Systemcore
Fixes sorting of Motioncore buses in telemetry tab
Fixes sidebar on telemetry expanding when a device has an alert in either run tab
Fixes issue reporting
Fixes issue where signals would freeze after closing a device
Fixes issue with A301 CAN ID change not persisting
Fixes issue where firmware versions sometimes do not populate in the update page
Improves download page
Improves update progress status display
Fixes update progress status when updating multiple devices across separate buses
Adds relative encoder utility for resetting relative position
Improves SPARK setpoint handling to minimize interfering with a connected robot's setpoint commands
Fixes issue where SPARKs with pre-2025 firmware are not detected on the CAN bus
Fixes SPARK slider setpoint resetting to zero after interacting with the minimum and maximum setpoint input boxes
Fixes detecting MAXSpline Encoders in bootloader mode
Fixes device drawer not defaulting to update page for devices in bootloader mode
Fixes firmware version select taking a long time to load for devices in bootloader mode
Fixes application not updating after clicking the Update button on macOS
Adds AdvantageScope logo
Fixes AdvantageScope sometimes not loading layout correctly on startup or when loaded from a file
Fixes AdvantageScope not resuming when computer wakes from sleep
Fixes regression preventing telemetry to resume when reconnecting a device
Prevents multiple instances of the app from running at once
Fixes bug causing SPARKs in brushed mode to get set to brushless upon connection
Fixes issue with parameters not refreshing when switching devices on telemetry run tab
Fixes spike in CAN utilization when opening a SPARK device by switching to lazy loading parameters
Fixes issue with SPARK run slider sometimes continuing to drag with mouse after releasing
Fixes device list sometimes not updating when unplugging USB
Disables highlighting across general areas of the application
Updates troubleshooting steps on about page