Startup the REV Hardware Client. Once the Power Distribution Hub is fully connected it will show up on the front page of the UI under the Hardware Tab. Select the Power Distribution Hub.
After selecting the Connected Hardware, the Update tab will pop up. Under Power Distribution Hub Firmware select Download.
Once the firmware has downloaded, select Update.
When the firmware update has completed a status message "Update Completed" will appear. The status for the Power Distribution Hub Firmware will also change to "Up-to-Date."
The REV Hardware Client has three tabs to manage different features of the Client. The Hardware Tab is where supported hardware devices are managed. The Downloads Tab allows for the downloading of supported device software for updating when offline. The About Tab has information on what devices are supported, updating the REV Hardware Client, and having issue reporting.
The Basic Tab is used to set the most common parameters for the Power Distribution Hub. You can also view and clear sticky faults here.
Sticky Fault - an indicator there was a fault that will stay until the fault has been cleared manually.
