The Original SPARK Motor Controller has been discontinued and will not be re-stocked.
The SPARK Motor Controller (REV-11-1200) is a 12V 60A PWM-controlled brushed DC motor controller designed for FIRST Robotics Competition robots. It features 60A continuous current with passive cooling, bi-directional limit switch inputs for smart mechanism control, an RGB LED status indicator, and a button-activated brake/coast mode.
Passive cooling
No fans required
Synchronous rectification
Reduces heat generation
Limit switch inputs
Stops forward and/or reverse motion automatically
No programming required
Compatible with normally open (NO) limit switches
Calibration
Factory calibrated to 1ms – 2ms input signal
User calibratable
Integrated cable retention for PWM port
Clamping screw terminals
Better contact area and retention
RGB status LED
Detailed mode and operation feedback
Input Voltage (Nominal)
12 V
Continuous Current
60 A
Peak Current (2 second surge)
100 A
Input Pulse Width Range (Nominal)
1ms-2ms
Input Resolution
1μs
Input Deadband
40μs
Output Frequency
15.625 kHz
Output Voltage Range
0 V - ±Vin
Maximum Output Voltage Resolution
0.001 x Vin
Dimensions
2.860in x 1.875in x 0.868in
Weight
74g or 2.61oz