The side of the bracket with “ribs” must have the Hex Cap Screw head.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
PART NUMBER
DESCRIPTION
QTY.
15MM BEARING PILLOW BLOCK
8
15MM PLASTIC LAP CORNER BRACKET
16
15MM PLASTIC INSIDE CORNER BRACKET
8
ULTRAPLANETARY BENT MOUNTING BRACKET
2
ULTRAPLANETARY FLAT MOUNTING BRACKET
2
M3 X 8MM HEX CAP SCREWS
104
M3 NYLOC NUTS
104
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have twelve Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have eight Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have eight Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.