Only two of the four 45 Degree Brackets in the build will be pre-loaded.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
The side of the bracket with “ribs” must have the Hex Cap Screw head.
PART NUMBER
DESCRIPTION
QTY.
15MM BEARING PILLOW BLOCK
10
15MM PLASTIC INSIDE CORNER BRACKET
10
15MM PLASTIC 45 DEGREE BRACKET
2
15MM METAL BENT HD HEX MOTOR BRACKET V2
2
15MM METAL BENT CORE HEX MOTOR BRACKET V2
1
15MM METAL BENT SERVO BRACKET V2
1
M3 X 8MM HEX CAP SCREWS
80
M3 NYLOC NUTS
80
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have ten Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have ten Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Repeat this step until you have two Pre-Loaded Brackets.
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE
Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.
PRE-LOADED BRACKET COMPELTE