The Driver Hub has two pieces of software that are field-upgradable: the Driver Hub Operating System and the Driver Station Application. Both pieces of software are updatable either through the REV Hardware Client 2 or directly on the Driver Hub with the Software Manager.
The Driver Hub has a Software Manager Application pre-installed for updating the Driver Hub. Open the application by pressing on the Software Manager icon. Select the Update All button to update all the software that requires updating.
Start up the REV Hardware Client 2 and connect the Driver Hub to the PC using the USB-A to USB-C cable. Once the hub is fully connected, it will show up on the front page of the UI under the Hardware Tab. Select the Control Hub.
After selecting the connected device, choose either Driver Hub OS or Driver Station App to update. Confirm the desired software version, then click the Download & Install Button below.
Keep the Driver Hub powered while the update is installing.
Once it reboots, you'll see a green Update Complete banner at the bottom, meaning the update was successful.
Once all the Out-of-Date notifications are cleared, the Driver Hub is fully up to date.
