Having our robot able to rotate the servo automatically can be incredibly useful, especially when writing an autonomous program, but what if I want to control the positions with my gamepad?
Let's take a look at how we can add input commands to our code!
For this example the known state will stay at position 0, so that after initialization the servo will be a the -135 degree position of the servo range. The following list shows what buttons correspond with which servo position:
If you are using a PS4 Controller, selecting the appropriate button from the dropdown in Blocks may be easier to follow when looking back at your code. The buttons are also interchangeable when programming in Blocks. (ex: Y in code = Triangle pressed on controller)
Button
Degree Position
Code Position
Y/Triangle
-135
0
X/Square
0
0.5
B/Circle
0
0.5
A/Cross
135
1
One of the most common logic statements used in programming is an if/else statement, also known as an if/then statement. In its most simple format we will be asking our robot to check IF something is happening and if the answer is yes, or true in our robot's mind, THEN it will DO what has been asked.
During this section we are going to be asking "If the Y button is pressed on our controller then move our servo to position 0."
If our servo will move to position 0 when the previous statement is TRUE, what do expect to happen when the answer is FALSE (or the Y button is not pressed)?
An if/else if statement takes in multiple different conditional statements. If the first conditional statement is found to be false then the second conditional state is analyzed.
Let's add to our existing logic statement the ability to move our servo to position 1 when A is pressed on our controller. Give it a try first before revealing the answer below!
How would our full logic statement be read once our new blocks are added?
If you have not already, test the code we have written thus far! The previous test_servo.setPosition(1);should be removed if it has not already.
What happens when both buttons are pressed at the same time?
We've previously added our ability to move to position 0 and 1, but what about 0.5?
You may have noticed in our gamepad chart at the beginning of this section that we are going to have two buttons able to move our servo to position 0.5. This is so we can practice using a logical operator.
In OnBot Java, || means "or" allowing the robot to check if one of two buttons things are true. In this case, it will check if the x OR b button are pressed on the gamepad.
Click to Build Everything and give your program a try!
There are three different paths in this if/else if statement. If the first conditional statement is true (the Y button is pressed) the servo moves to code position 0 and the other conditional statements are ignored.
If the first condition is false (the Y button is not pressed) the second condition is analyzed. This means the order we add our pathways DOES matter. If X and A are pressed at the same time, the robot will will try to prioritize the X button first.