We're Updating our Documentation! For the most up-to-date information about the Power Distribution Hub and other ION Control System Devices please check out the following new documentation pages:
The REV Hardware Client has three tabs to manage different features of the Client. The Hardware Tab is where supported hardware devices are managed. The Downloads Tab allows for the downloading of supported device software for updating when offline. The About Tab has information on what devices are supported, updating the REV Hardware Client, and having issue reporting.
The Basic Tab is used to set the most common parameters for the Power Distribution Hub. You can also view and clear sticky faults here.
Sticky Fault - an indicator there was a fault that will stay until the fault has been cleared manually.
We're Updating our Documentation! For the most up-to-date information about the Power Distribution Hub and other ION Control System Devices please check out the following new documentation pages:
The REV Hardware Client is software designed to make managing REV devices easier for the end user. This Client automatically detects connected device(s), downloads the latest software for those device(s), allows for seamless updating of the device(s), and allows for device configuration and management.
For more information on the REV Hardware Client, including a full list of supported devices, see the User's Manual.
You can also download the REV Hardware Client using an offline installer, bundled with software from March 21st, 2023: - Offline Installer bundled with FRC software
Operating System: Windows 10 (64-bit) or newer
Processor: 64-bit
Download the REV Hardware Client Installer above.
Run the Installer
Run the REV Hardware Client from the Windows Start Menu or a desktop shortcut
Startup the REV Hardware Client. Once the Power Distribution Hub is fully connected it will show up on the front page of the UI under the Hardware Tab. Select the Power Distribution Hub.
After selecting the Connected Hardware, the Update tab will pop up. Under Power Distribution Hub Firmware select Download.
Once the firmware has downloaded, select Update.
When the firmware update has completed a status message "Update Completed" will appear. The status for the Power Distribution Hub Firmware will also change to "Up-to-Date."
Latest REV Hardware Client - Version 1.5.3 |
---|