Medium Complexity
Don't see what you're looking for? Check out our other Onshape examples too!
3-4-5 Structures
1x1in MAXTube 3-4-5 Triangle - Onshape File
Demonstrates how to make a 3-4-5 triangle with 1x1 MAXTube, Internal 3-4-5 Brackets, and 90deg Brackets

MAX Pattern 3-4-5 Triangle - Onshape File
Demonstrates how to make a 3-4-5 triangle with MAXTube, MAXSpline Brackets, and External 3-4-5 Brackets

MAXPattern Offset 3-4-5 Triangle - Onshape File
Demonstrates how to make an offset 3-4-5 triangle with MAXTube, MAXSpline Brackets, and 1in Brackets

MAXPattern Open-Offset 3-4-5 Triangle - Onshape File
Demonstrates how to make an open-offset 3-4-5 triangle with a mixture of 2x1 and 1x1 MAXTube and 1in Brackets

Belt and Chain Roller Connections
Pulley and Sprocket Rollers - Onshape File
Creating a roller series using MAXTube and MAXSpline with Dead Axle Tubes - This example demonstrates turning the rollers with both a pulley and sprocket system

MAXPattern Plates
Direction Reversal - Onshape File
Showcases the use of the MAX Pattern Plates by creating a contained “gearbox” with gears driven by a NEO V1.1. The gears drive two sets pulleys and belts in opposite directions

MAXSpline Brackets: Parallel Side/Top Mount
NEO Attachment: Basic - Onshape File
Using a Offset Mount bracket to mount a NEO V1.1 with the MAXPlanetary Gearbox along the side of a MAXTube with no pattern

NEO Attachment: MAXSpline - Onshape File
Shows how to side-mount a driven MAXSpline roller to a patternless MAXTube using the Offset Brackets

Parallel Top Mount - Onshape File
Demonstrates using the Parallel Top Mount bracket to support a pulley seated off the side of MAXTube

Ratio Plates
Ratio Plate: 2:1 - Onshape File
Utilizes the Ratio Plate to lift and offset a NEO V1.1 from the MAXTube structure for use with a pulley system controlling a rolling MAXSpline shaft

16:64 Sprocket Live Axle - Onshape File
Using 4:1 Ratio Plates to raise and offset a NEO V1.1 with MAXPlanetary gearbox to drive a sprocket and chain system

Roller Assemblies
Chain-in-tube - Onshape File
Containing a sprocket and chain system within the MAXTube while creating a NEO V1.1-driven compliant wheel roller

Belt-in-tube - Onshape File
Containing a pulley and belt system within the MAXTube while creating a NEO V1.1-driven compliant wheel roller

Chain Outside - Onshape File
Creating a complaint wheel roller driven by a NEO V1.1 turning a sprocket and chain system alongside MAXTube

Belt Outside - Onshape File
Creating a complaint wheel roller driven by a NEO V1.1 turning a pulley and belt system alongside MAXTube

Don't see what you're looking for? Check out our other Onshape examples too!
Last updated
Was this helpful?