LogoLogo
  • REV DUO
  • Structure
    • Introduction to Structure
      • 15mm Extrusion
      • 15mm x 30mm Extrusion
      • 15mm x 45mm C Channel
      • 45mm x 45mm U Channel
      • Flat Plate
      • Flat Beam
      • L Beam
    • Brackets
    • Corrugated Plastic Sheets
    • M3 Hardware
  • Motion
    • Introduction to Motion
      • Hex Shaft and Spacers
      • Bearings
    • Sprockets and Chain
      • Advanced Sprockets and Chain
      • Chain Tool
    • Timing Belts and Pulleys
    • Gears
      • Advanced Gears
    • Wheels
    • Linear Motion
    • Choosing an Actuator
    • Motors
      • HD Hex Motor
        • Pinion Pressing Guide
        • Pinion Removal Guide
      • Core Hex Motor
    • Servos
      • Smart Robot Servo
  • Building Techniques
    • Tips and Tricks for Building
    • Supporting Motion
    • Constraining Motion
    • Compatibility
  • Build Guides
  • Linear Motion Kit
    • Three Stage Cascading Lift
    • Three Stage Continuous Lift
  • Channel Drivetrain
    • Single Sprocket Shaft Assembly
    • Double Sprocket Shaft Assembly
    • Drive Shaft Assembly
    • UltraPlanetary Gearbox Assembly
    • Making the Chain Links
    • Drive Rail Assembly
    • Final Assembly
  • Channel Drivetrain - Mecanum Upgrade
    • 90mm Single Sprocket Shaft Assembly
    • 75mm Single Sprocket Shaft Assembly
    • Drive Shaft Assembly
    • UltraPlanetary Gearbox Assembly
    • Making the Chain Links
    • Drive Rail Assembly
    • Final Assembly
    • Mecanum Wheel Setup and Behaviour
  • Mecanum Drivetrain V2
    • UltraPlanetary Gearbox Assembly
    • Drive Rail Assembly
    • Final Assembly
    • Mecanum Wheel Setup and Behavior
    • Mecanum Drivetrain Example Code
  • Mecanum Drivetrain Kit
    • UltraPlanetary Gearbox Assembly
    • Drive Rail Assembly
    • Final Assembly
    • Mecanum Wheel Setup and Behavior
    • Mecanum Drivetrain Example Code
  • Extrusion Chain Drivetrain
    • Pre-Loading Brackets
    • Traction Wheel Assembly
    • Omni Wheel Assembly
    • UltraPlanetary Gearbox Assembly
    • Internal Chassis Frame Assembly
    • Making the Chain Links
    • Final Assembly
  • Extrusion Gear Drivetrain
    • Pre-Loading Brackets
    • Omni Wheel Assembly
    • Middle Grip Wheel Assembly
    • Front Grip Wheel Assembly
    • Gear Idler Assembly
    • UltraPlanetary Gearbox Assembly
    • Internal Chassis Frame Assembly
    • Final Assembly
  • Class Bot V2
    • Pre-Loading Brackets
    • Internal Robot Frame Assembly
    • External Robot Frame Assembly
    • Wheel Assemblies
    • Arm Gear Assemblies
    • Arm Assemblies
    • Final Assembly
  • Class Bot
    • Pre-Loading Brackets
    • Internal Robot Frame Assembly
    • External Robot Frame Assembly
    • Wheel Assemblies
    • Arm Gear Assemblies
    • Arm Assemblies
    • Final Assembly
  • Electronics and Communication
    • REV Control System
    • Sensors
Powered by GitBook
On this page
  • Bracket Pre-Loading Parts Required
  • Pre-Loading Lap Corner Bracket Steps
  • Pre-Loading Insider Corner Bracket Steps
  • Pre-Loading Bearing Pillow Block Steps
  • Pre-Loading UltraPlanetary Flat Mounting Bracket Steps
  • Pre-Loading UltraPlanetary Bent Mounting Bracket Steps

Was this helpful?

Export as PDF
  1. Extrusion Chain Drivetrain

Pre-Loading Brackets

PreviousExtrusion Chain DrivetrainNextTraction Wheel Assembly

Last updated 3 years ago

Was this helpful?

Bracket Pre-Loading Parts Required

PART NUMBER

DESCRIPTION

QTY.

15MM BEARING PILLOW BLOCK

8

15MM PLASTIC LAP CORNER BRACKET

16

15MM PLASTIC INSIDE CORNER BRACKET

8

ULTRAPLANETARY BENT MOUNTING BRACKET

2

ULTRAPLANETARY FLAT MOUNTING BRACKET

2

M3 X 8MM HEX CAP SCREWS

104

M3 NYLOC NUTS

104

Pre-Loading Lap Corner Bracket Steps

The side of the bracket with “” must have the Hex Cap Screw head.

Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.

PRE-LOADED BRACKET COMPELTE

Repeat this step until you have twelve Pre-Loaded Brackets.

Pre-Loading Insider Corner Bracket Steps

The side of the bracket with “” must have the Hex Cap Screw head.

Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.

PRE-LOADED BRACKET COMPELTE

Repeat this step until you have eight Pre-Loaded Brackets.

Pre-Loading Bearing Pillow Block Steps

Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.

PRE-LOADED BRACKET COMPELTE

Repeat this step until you have eight Pre-Loaded Brackets.

Pre-Loading UltraPlanetary Flat Mounting Bracket Steps

Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.

PRE-LOADED BRACKET COMPELTE

Repeat this step until you have two Pre-Loaded Brackets.

Pre-Loading UltraPlanetary Bent Mounting Bracket Steps

Take a bracket and finger start one Hex Cap Screw and Nyloc Nut per hole.

PRE-LOADED BRACKET COMPELTE

Repeat this step until you have two Pre-Loaded Brackets.

The side of the bracket with “” must have the Hex Cap Screw head.

REV-41-1317
REV-41-1321
REV-41-1320
REV-41-1623
REV-41-1624
REV-41-1359
REV-41-1361
ribs
ribs
ribs