LogoLogo
  • REV ION Build System
  • FRC Robot Basics Guide
  • System Standards
  • Structure
    • Introduction to Structure
    • Brackets
      • MAXSpline Brackets
      • Structure Brackets
      • Actuator Brackets
    • MAX Pattern Plates
    • Hardware
    • Extrusion
    • Bumper Brackets
    • MAXComposite
  • Motion
    • Introduction to Motion
    • Shafts / Spacers / Collars
    • MAXHubs
    • Tubes / Bushings / Axles
    • Bearings / Bearing Blocks
    • Pivot Joints
    • Linear Actuators
    • Gears
      • Advanced Gears
    • Sprockets and Chain
      • Advanced Sprockets and Chain
      • Chain Tool
    • Belts and Pulleys
    • Ratio Plates
    • NEO Brushless Motors
    • Servos
      • Smart Robot Servo
    • Wheels
      • Traction
      • Grip
      • Omni
      • Compliant
      • Flap
    • Gearboxes
      • 2 Motor Gearbox - Through Bore
      • 2 Motor Drivetrain Gearbox - Through Bore
    • MAXPlanetary System
      • System Features
      • Mounting Features
      • Load Ratings
      • Assembly Tips and Tricks
    • MAXSwerve
      • MAXSwerve Build Guide
      • MAXSwerve Drivetrain Onshape
      • MAXSwerve Calibration
      • Wiring MAXSwerve
      • Programming MAXSwerve
      • MAXSwerve Wheel V1 Evaluation
      • MAXSwerve Module Inspection
      • Aluminum MAXSwerve Wheels
      • MAXSwerve Wheel Tread Reinforcement
  • Onshape Examples
    • Onshape CAD Examples
    • Low Complexity
    • Medium Complexity
    • High Complexity
  • Building Techniques
    • Supporting Motion
    • Constraining Motion
  • Build Guides
    • MAXSwerve Module Assembly
      • Motor Orientation
      • MAXSwerve SPARK MAX Mounting Bracket Assembly
      • MAXSwerve Pack Contents
      • MAXSwerve Assembly Tips
    • MAXSwerve Drivetrain Assembly
    • Elevator Bearing Block Assembly
    • MAXPlanetary Gearbox Assembly
      • NEO & CIM
      • NEO Vortex
      • NEO 550 & 550 Sized Motors
      • 775 Sized Motors
      • Falcon
      • Shaft Retention Assembly
      • Spacer Installation
    • MAX 90 Degree Gearbox Assembly
    • 2 Motor Drivetrain Gearbox Assembly
    • 2 Motor Gearbox Assembly
    • Linear Actuator Assembly
    • MAX 180 Degree Gearbox Assembly
    • Drivetrain Bumper Kit Assembly
      • West Coast Drivetrain with MAXTube
      • AM14U5 (FRC Kit of Parts Chassis)
    • REV ION West Coast Drivetrain Assembly
  • REV ION Control System
    • REV Hardware Client
    • Power Distribution Hub
    • Radio Power Module
    • Mini Power Module
    • Brushless Motors and Controllers
    • Pneumatics
    • Sensors & Indicators
Powered by GitBook
On this page
  • Features
  • Base Kit Contents
  • Ratio Gear Bundle Contents

Was this helpful?

Export as PDF
  1. Motion
  2. Gearboxes

2 Motor Gearbox - Through Bore

PreviousGearboxesNext2 Motor Drivetrain Gearbox - Through Bore

Last updated 1 year ago

Was this helpful?

Features

  • Allows user to adjust gear ratio by changing pinion and cluster gear (12:60, 18:54, 24:48, or 36:36)

  • Output shaft is 1/2in Hex through bore

  • Output gears have MAXSpline bore

  • Motor Plate contains 2 pairs of 2in pitch #10-32 tapped holes for mounting the Through Bore Encoder

  • Output Plate has array of holes for mounting to structure, as well as mounting an input to MAXPlanetary

  • 5:1 ratio can be micro-adjusted by swapping a 12T pinion for an 11T or 10T

Base Kit Contents

SKU
DESCRIPTION
QTY.

2 MOTOR GEARBOX HARDWARE PACK

1

REV-21-2099-P01

2 MOTOR GEARBOX MOTOR PLATE

1

REV-21-2099-P02

2 MOTOR GEARBOX BEARING PLATE

1

2 MOTOR GEARBOX SPACER PACK

1

REV-21-2079

1/2IN HEX THROUGH BORE SHAFT

1

REV-21-1879

8MM TO 1/2IN HEX ADAPTER

2

BEARING, 30MM ID, 42mm OD, 7MM THICK, SHIELDED, FLANGED

2

Ratio Gear Bundle Contents

Note that the 2 Motor Gearbox Base Kit does not come with Ratio Gear Bundles.

The following items may or may not be included based on your product selection. Selecting a Base Kit and Ratio Gear Bundle are both required to assemble a gearbox.

Each Ratio Gear Bundle comes with one MAXSpline Gear and two 1/2in Hex Bore Gears.

RATIO
MAXSPLINE GEAR
1/2IN HEX BORE GEAR

1:1

20DP GEAR- MAXSPLINE- 36T

20DP GEAR - 1/2IN HEX - 36T

2:1

20DP GEAR- MAXSPLINE- 48T

20DP GEAR- 1/2IN HEX- 24T

3:1

20DP GEAR- MAXSPLINE- 54T

20DP GEAR- 1/2IN HEX- 18T

5:1

20DP GEAR- MAXSPLINE- 60T

20DP NEO PINION GEAR- 12T

6:1

20DP GEAR- MAXSPLINE- 60T

20DP NEO PINION GEAR- 10T

2 Motor Gearbox - Through Bore
An image of the 2 motor gearbox- Through Bore with two NEO motors attached