LogoLogo
  • REV ION Build System
  • FRC Robot Basics Guide
  • System Standards
  • Structure
    • Introduction to Structure
    • Brackets
      • MAXSpline Brackets
      • Structure Brackets
      • Actuator Brackets
    • MAX Pattern Plates
    • Hardware
    • Extrusion
    • Bumper Brackets
    • MAXComposite
  • Motion
    • Introduction to Motion
    • Shafts / Spacers / Collars
    • MAXHubs
    • Tubes / Bushings / Axles
    • Bearings / Bearing Blocks
    • Pivot Joints
    • Linear Actuators
    • Gears
      • Advanced Gears
    • Sprockets and Chain
      • Advanced Sprockets and Chain
      • Chain Tool
    • Belts and Pulleys
    • Ratio Plates
    • NEO Brushless Motors
    • Servos
      • Smart Robot Servo
    • Wheels
      • Traction
      • Grip
      • Omni
      • Compliant
      • Flap
    • Gearboxes
      • 2 Motor Gearbox - Through Bore
      • 2 Motor Drivetrain Gearbox - Through Bore
    • MAXPlanetary System
      • System Features
      • Mounting Features
      • Load Ratings
      • Assembly Tips and Tricks
    • MAXSwerve
      • MAXSwerve Build Guide
      • MAXSwerve Drivetrain Onshape
      • MAXSwerve Calibration
      • Wiring MAXSwerve
      • Programming MAXSwerve
      • MAXSwerve Wheel V1 Evaluation
      • MAXSwerve Module Inspection
      • Aluminum MAXSwerve Wheels
      • MAXSwerve Wheel Tread Reinforcement
  • Onshape Examples
    • Onshape CAD Examples
    • Low Complexity
    • Medium Complexity
    • High Complexity
  • Building Techniques
    • Supporting Motion
    • Constraining Motion
  • Build Guides
    • MAXSwerve Module Assembly
      • Motor Orientation
      • MAXSwerve SPARK MAX Mounting Bracket Assembly
      • MAXSwerve Pack Contents
      • MAXSwerve Assembly Tips
    • MAXSwerve Drivetrain Assembly
    • Elevator Bearing Block Assembly
    • MAXPlanetary Gearbox Assembly
      • NEO & CIM
      • NEO Vortex
      • NEO 550 & 550 Sized Motors
      • 775 Sized Motors
      • Falcon
      • Shaft Retention Assembly
      • Spacer Installation
    • MAX 90 Degree Gearbox Assembly
    • 2 Motor Drivetrain Gearbox Assembly
    • 2 Motor Gearbox Assembly
    • Linear Actuator Assembly
    • MAX 180 Degree Gearbox Assembly
    • Drivetrain Bumper Kit Assembly
      • West Coast Drivetrain with MAXTube
      • AM14U5 (FRC Kit of Parts Chassis)
    • REV ION West Coast Drivetrain Assembly
  • REV ION Control System
    • REV Hardware Client
    • Power Distribution Hub
    • Radio Power Module
    • Mini Power Module
    • Brushless Motors and Controllers
    • Pneumatics
    • Sensors & Indicators
Powered by GitBook
On this page
  • ION UltraPlanetary Bracket
  • MAXSpline Bracket - Motor Mount - Flat
  • MAXSpline Bracket - Motor Mount - Bent
  • Universal Motor Bracket
  • MAXPlanetary Kraken X44 & Minion Adapter Plate
  • ION Servo Face Mount Bracket
  • 1in Flat Universal Motor Bracket V2 [Discontinued]
  • 1in Bent Universal Motor Bracket V2 [Discontinued]

Was this helpful?

Export as PDF
  1. Structure
  2. Brackets

Actuator Brackets

PreviousStructure BracketsNextMAX Pattern Plates

Last updated 4 months ago

Was this helpful?

ION UltraPlanetary Bracket

The ION UltraPlanetary Face Mount Bracket () allows for easy mounting of our UltraPlanetary Gearbox to any of our MAXTube products. The plate features 2 x #10-32 tapped inserts for easy mounting on any structure.

Specifications:

  • Material: Glass-Filled Nylon

  • Weight: 6g (0.01lb)

MAXSpline Bracket - Motor Mount - Flat

Specifications:

  • Material: 5052 Aluminum

  • Thickness: 3mm (0.12in)

  • Motor Mounting Holes: #10-32 on 2in bolt circle

  • Mounting Holes: 5mm (0.196in) holes on 0.5in grid

  • Weight: 33g (0.073lb)

MAXSpline Bracket - Motor Mount - Bent

Specifications:

  • Material: 5052 Aluminum

  • Thickness: 3mm (0.12in)

  • Motor Mounting Holes: #10-32 on 2in bolt circle

  • Mounting Holes: 5mm (0.196in) holes on 0.5in grid

  • Weight: 27g (0.060lb)

Universal Motor Bracket

Specifications:

  • Material: 6061 Aluminum

  • Thickness: 4.76mm (0.188in)

  • Length: 108mm (4.252in)

  • Width: 63.5mm (2.5in)

  • Mounting Holes: 5mm (0.196in) holes on 0.5in vertical and 0.25in horizontal grid

  • Compatible with the following motors and accessories:

    • NEO 1.1, NEO 550, SPARK Flex/ NEO Vortex, MAXPlanetary, UltraPlanetary, Falcon 500, Kraken X60, Kraken X44, Minion, CIM/Mini CIM, 775pro/redline, MAX 90, MAX 180

  • Weight: 70g (0.154lb)

MAXPlanetary Kraken X44 & Minion Adapter Plate

  • Material: 6061 Aluminum

  • Finish: Black Anodized

  • Thickness: 9.5mm (0.374in)

  • Motor Mounting Holes: #10 clearance

  • Motor Hole Counterbore: 10mm (0.394in) diameter, 5mm (0.196in) depth

  • Mounting Holes: #10-32 on 2in bolt circle

  • Through Bore Diameter: 19mm (0.752in)

  • Mounting Footprint Narrow Side Width: 50.8mm (2in)

  • Mounting Footprint Rounded Side Diameter: 60mm (2.362in)

  • Weight: 50g (0.11lb)

ION Servo Face Mount Bracket

1in Flat Universal Motor Bracket V2 [Discontinued]

Specifications:

  • Material: 5052 Aluminum

  • Thickness: 3mm (0.12in)

  • 0.196in holes on 0.5in grid

  • Compatible with the following motors:

    • NEO 1.1, NEO 550, Falcon 500, CIM/Mini CIM, 775Pro/Redline, BAG

  • Weight: 46g (0.102lb)

1in Bent Universal Motor Bracket V2 [Discontinued]

The MAXSpline Bracket - Motor Mount - Flat () facilitates quick mounting of motors or gearboxes with a 2in bolt pattern to MAXTubing or structures. It includes a MAXSpline Bore for accommodating bearings, shaft integration, or other MAXSpline Bore-compatible components.

The MAXSpline Bracket - Motor Mount - Bent () offers similar functionality to the flat version but features a 90-degree bend on the mounting tabs for versatile positioning. It also includes a MAXSpline Bore for bearing and shaft integration or other compatible components

The Universal Motor Bracket () is compatible with most motors or gearboxes, allowing rapid attachment to structures. It features 5mm (0.196in) holes on 0.25in pitch horizontal spacing for precise positioning without the risk of plate slippage. This bracket is ideal for quick problem-solving and efficient prototyping systems.

The MAXPlanetary Kraken X44 & Minion Adapter Plate () is designed with counterbored motor mounting holes and #10-32 tapped holes on a 2-inch bolt circle for seamless REV ION compatibility. Its compact footprint ensures a streamlined setup no matter if you are using it as an input for MAXPlanetary or mounting directly to MAX Pattern.

The ION Servo Face Mount Bracket () allows for easy integration of Servo Motors into the ION System. Mount a servo motor, such as our Smart Robot Servo (), on a 1/2in pitch and line up perfectly with the MAXPattern on MAXTube.

The 1in Flat Universal Motor Bracket V2 () changes the holes on the 25mm bolt circle from an M4 to an M3 tight fit hole to accommodate 550 style motors, including the NEO 550 Brushless Motor. To use a BAG Motor, the holes on the 25mm bolt circle need to be drilled out to a M4 tight fit.

The 1in Bent Universal Motor Bracket V2 (REV-21-1842) This bracket is designed to work seamlessly with the most popular motors in FRC. The Bent Universal Motor Bracket V2 changes the holes on the 25mm bolt circle from an M4 to an M3 tight fit hole to accommodate 550 style motors, including the . To use a BAG Motor, the holes on the 25mm bolt circle need to be drilled out to a M4 tight fit.

REV-21-2360
REV-21-2361
REV-21-2804
REV-21-4444
REV-21-2896
REV-41-1097
REV-21-1841
NEO 550 Brushless Motor
REV-21-2046
MAXSpline Flat Bracket
MAXSpline Bent Bracket
Universal Motor Bracket
MAXPlanetary Kraken X44 & Minion Adapter Plate
1in Flat Universal Motor Bracket
1in Bent Universal Motor Bracket