# SPARK MAX Getting Started

The SPARK MAX is a motor controller that can control both Brushed DC and Brushless DC motors. Out of the box, the MAX defaults to its Brushless Mode and is ready to drive a NEO Brushless Motor with its PWM interface. Included in this section are the basic steps to get a motor spinning using the REV Hardware Client as well as information on how to configure your SPARK MAX. 

{% hint style="info" %}
We recommend following this guide in its entirety at least once to understand the key features of the SPARK MAX. This guide can also serve as a fallback in case of any issues faced.
{% endhint %}

## Before You Start

Before following this guide, the[ REV Hardware Client should be installed](https://app.gitbook.com/s/-MGEfA6CxjaSQiH5kHxn/gs/install) before continuing. The client is the best way to verify that the device is configured correctly, and is ***required*** before using the CAN interface.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.revrobotics.com/brushless/spark-max/gs.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.