LogoLogo
  • Introduction
  • Getting Started with Control Hub
    • Connect to the Robot Controller Console
    • Updating Wi-Fi Settings
    • Connecting Driver Station to Control Hub
    • Wiring Diagram
    • Next Steps
  • Getting Started with Driver Hub
  • Adding More Motors
    • SPARKmini Motor Controller
    • Adding an Expansion Hub
  • Troubleshooting the Control System
    • General Troubleshooting
    • Control Hub Troubleshooting
    • Driver Hub Troubleshooting
      • Driver Hub Battery Troubleshooting
    • Expansion Hub Troubleshooting
    • Status LED Blink Codes
  • System Overview
    • Control Hub Specifications
    • Expansion Hub Specifications
    • Driver Hub Specifications
    • Port Pinouts
    • Protection Features
    • Cables and Connectors
      • XT-30 - Power Cable
      • JST VH - Motor Power
      • JST PH - Sensors and RS485
    • Integrated Sensors
    • Dimensions and Important Component Locations
  • Updating and Managing
    • Managing Wi-Fi on the Control Hub
    • REV Hardware Client
    • Updating Firmware
      • Firmware Changelog
    • Updating Operating System
      • Control Hub Operating System Changelog
    • Updating Robot Controller Application
      • Updating Robot Controller Application via Android Studio
    • Updating the Driver Hub
      • Driver Hub OS - Change Log
    • Accessing Log Files
    • Android Studio - Deploying Code Wirelessly
  • Hello Robot - Intro to Blocks Programming
    • Welcome to Hello Robot!
    • Where to Program - Client vs. Browser
      • What is an OpMode?
    • Setting up a Configuration
      • Common Errors in Configuration
    • Using a Gamepad
    • Part 1: Tackling the Basics
      • Tackling the Basics Directory - Blocks
      • Creating an OpMode - Blocks
      • Programming Essentials
      • Programming Servos
        • Programming Servo Basics
        • Using a Gamepad with a Servo
        • Programming Servo Telemetry
      • Programming Motors
        • Programming Motors Basics
        • Programming a Motor with a Gamepad
        • Programming Motor Telemetry
      • Programming Touch Sensors
      • Programming Color Sensors
        • Color Sensor Telemetry
        • Detecting Color
    • Part 2: Robot Control
      • Robot Control Blocks Directory
      • Programming Drivetrain Motors
      • Arcade Style TeleOp - Blocks
        • Establishing Variables in Blocks
        • Motor Power vs. Robot Movement
        • Programming Arcade Drive
      • Arm Control - Blocks
        • Adding a Limit Switch
      • Robot Control Full Program
    • Part 3: Autonomous and Encoders
      • ElapsedTime - Blocks
        • ElapsedTime Setup
        • ElapsedTime Logic
        • ElapsedTime - Multiple Movements
      • Encoder Basics
      • Drivetrain Encoders - Blocks
        • Converting Encoder Ticks to a Distance
        • Moving to a Target Distance
        • Setting Velocity
        • Turning the Drivetrain Using RUN_TO_POSITION
      • Arm Control with Encoders - Blocks
        • Estimating the Position of the Arm
        • Calculating Target Position
        • Using Limits to Control Range of Motion
    • Part 4: Going Beyond!
      • Exploring Functions
      • Programming Mecanum - Simplified
      • Programming Mecanum - Refined
  • Hello Robot - Intro to OnBot Java Programming
    • Welcome to Hello Robot!
    • Where to Program - Client vs. Browser
      • What is an OpMode?
    • Setting up a Configuration
      • Common Errors in Configuration
    • Using a Gamepad
    • Part 1: Tackling the Basics
      • Tackling the Basics Directory - OnBot
      • Creating an OpMode - OnBot
      • Programming Essentials
      • Programming Servos
        • Programming Servo Basics
        • Using a Gamepad with a Servo
        • Programming Servo Telemetry
      • Programming Motors
        • Programming Motor Basics
        • Programming a Motor with a Gamepad
        • Programming Motor Telemetry
      • Programming Touch Sensors
    • Part 2: Robot Control
      • Robot Control OnBot Java Directory
      • Programming Drivetrain Motors
      • Arcade Style TeleOp - OnBot Java
        • Establishing Variables in OnBot Java
        • Motor Power vs. Robot Movement
        • Programming Arcade Drive
      • Arm Control - OnBot Java
        • Adding a Limit Switch
      • Robot Control Full Program
    • Part 3: Autonomous and Encoders
      • ElapsedTime - OnBot Java
        • ElapsedTime Setup
        • ElapsedTime Logic
        • ElapsedTime - Multiple Movements
      • Encoder Basics
      • Drivetrain Encoders - OnBot Java
        • Converting Encoder Ticks to a Distance
        • Moving to a Target Distance
        • Setting Velocity
        • Turning the Drivetrain Using RUN_TO_POSITION
      • Arm Control with Encoders - OnBot Java
        • Estimating the Position of the Arm
        • Calculating Target Position
        • Using Limits to Control Range of Motion
  • Sensors
    • Introduction to Sensors
    • Digital
    • Analog
    • I2C
      • IMU
        • Orientating the IMU
      • Adding an External IMU to your Hub
    • Encoders
      • REV Motor Encoders
      • Through Bore Encoder
    • Using 3rd Party Sensors
      • Sensor Compatibility Chart
  • Useful Links
    • REV DUO Build System
  • Legacy Documentation
    • Configuring Your Android Devices
    • Expansion Hub with Android Device Robot Controller
      • Driver Station and Robot Controller Pairing
      • Wiring Diagram
      • Configuration
    • REV Hub Interface Software
Powered by GitBook
On this page
  • Driver Hub Software Manager
  • REV Hardware Client

Was this helpful?

Export as PDF
  1. Updating and Managing

Updating the Driver Hub

PreviousUpdating Robot Controller Application via Android StudioNextAccessing Log Files

Last updated 2 years ago

Was this helpful?

The Driver Hub has two pieces of software that are field upgradable, the Driver Hub Operating System and the Driver Station Application. Both pieces of software are updatable either through the or directly on the .

Driver Hub Software Manager

The Driver Hub has a Software Manager Application pre-installed for updating the Driver Hub. Open the application by pressing on the Software Manager icon. Select the Update All button to update all the software that requires updating.

Make sure the Driver Hub is connected to a Wi-Fi network with access to the internet to download and install the latest software.

The updates can take several minutes to complete. Make sure the Driver Hub is charged or plug in the Driver Hub during the updating process.

REV Hardware Client

Startup the REV Hardware Client and connect the Driver Hub to the PC using the USB-A to USB-C cable. Once the Driver Hub is connected it will show up on the front page of the UI under the Hardware Tab. Select the Driver Hub.

After selecting the Connected Hardware the Update tab will pop up. Any software the needs updating will have an Out-of-Date notification. Pressing the update button allows the REV Hardware Client to download the software update and install on the Driver Hub.

Once all the Out-of-Date notifications are cleared the Driver Hub is fully up to date.

REV Hardware Client
Driver Hub with the Software Manager